Sharp XE-A212 Wg W H hijk01, Entering character codes with numeric keys on the keyboard

A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 32

To program the word “Clerk01” with the letter “C” being double size.

To make the letter “C” double size character

To make character size return to normal size

To toggle the characters to lower-case letters

Wg

W

H

hijk01

=C			PGM
01	W	02
=C			PGM
01		02
=C			PGM
01	a	02
=Clerk01			PGM
01	a	08

Entering character codes with numeric keys on the keyboard

To enter a numeral, letter or symbol, enter a character code using numeric keys and press the numeric key :. For the character codes, please refer to the alphanumeric character code table on the next page. Be doing this, you can program characters other than those on the key tops.

•Double-size characters can be made by entering the character code 253 or pressing the Wkey. “W” is displayed when double-size characters entry is selected as shown in the operator display example below.

•All three digits of the character code MUST be entered (even if it starts with zero).

Operator display (Example)

Cursor

Characters: Indicating double size character of “A”

Press of 253 : 065

			PGM		Press of	=A		PGM
	01	W	065	:		01	W	02
			Character code					Number of characters
Department code, PLU code, function number,								programmed
clerk code or logo message line number is displayed here.

Characters entered are displayed here.

To program the word “SHARP” in double-size characters

253 : 083 : 072 : 065 : 082 : 080 :

S H A R P

32