Sharp XE-A212 instruction manual PLU level shift and GLU function parameters, Other programming

A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 51

PLU level shift and GLU function parameters

Job code: 15
* Item:			Selection:	Entry:
	A	PLU level shift mode	Automatic return mode*	0
			Lock shift mode	1
	B	PLU level shift operation availability	Available in MGR & REG modes*	0
			Available in MGR mode	1
	C	PLU level shift timing for returning to	1 item*	0
		level 1 in automatic return mode	1 transaction	1
	D	Checking clerk code on guest check	Yes	0
		when a reorder is made	No*	1
	E	Printing of previous and new balances on	Yes	0
		G.C. receipt	No*	1
	F	Clearing details in GLU buffer at a press	No*	0
		of ˜	Yes	1
	G	Clearing details in GLU buffer at a press	No	0
		of ˝	Yes*	1
	H	Always enter 0.		0

Other programming

As the guidance messages for other programming, “OTHERS + the lower digit number of job code” is displayed. For example, for job code 61, “OTHERS 1” is displayed as the guidance message.

Job code: 61
* Item:			Selection:	Entry:
	A	Always enter 0.		0
	B	Always enter 0.		0
	C	Negative dept. and PLU/subdept.	Disable	0
			Enable*	1
	D	Fractional treatment	Round off (4 down, 5 up)*	0
			Raising to unit	1
			Disregarding fractional treatment	2
	E	Use of : key	As 00 key*	0
			As 000 key	1
	F	Time format	12-hour format	0
			24-hour format*	1
	G	Date format	Use month-day-year format	0
			Use day-month-year format*	1
			Use year-month-day format	2
	H	Position of decimal point (from right) (TAB)		0 to 3 (default: 2)

51