Sharp XE-A212 s 12 @, 01 s A, EURO Programming, EURO system settings, s 8 @ 1000 s, Selection

A212_4 FOR THE MANAGER 03.7.5 8:03 AM Page 59

4EURO Programming

For details of EURO migration operation, please refer to “EURO MIGRATION FUNCTION”.

EURO system settings

To set “0” for all items

s 8 @ *ABCD sA

* Item:			Selection:	Entry:
	A	Printing exchange total amount and	No*	0
		change amount on receipt or journal	Yes	1
	B	Always enter 0.		0
	C	Cheque and credit operation when	No*	0
		tendering in foreign currency	Yes	1
	D	Exchange calculation method	Multiplication*	0
			Division	1

Printing exchange total amount and change amount on receipt/journal

•Total and change amounts in exchange currency are printed respectively below each of the total and exchange amounts in domestic currency.

Exchange calculation method

•“Division” or “Multiplication” can be selected for the conversion method from domestic currency to exchange currency, and the calculation is performed as follows:

In case that “Division” is selected:

Domestic currency amount  Exchange rate = Exchange amount In case that “Multiplication” is selected

Domestic currency amount  Exchange rate = Exchange amount

Key operation example Print

s8 @

1000 s

A

Automatic EURO modification operation settings

s 12 @

To set “00”

*AB s A

* Item:			Selection:	Entry:
	A	Converting the preset unit price of Dept./PLU in the automatic	Yes*	0
		modification operation for EURO (job #800 in the X2/Z2 mode)	No	1
	B	Automatic modification operation for EURO	Compulsory*	0
		(job #800 in the X2/Z2 mode) at the preset date	Non-compulsory	1
		Key operation example	Print

s12 @

01s

A

If you have already made the Job #800 operation with the substitution of 3 for “A” in the X2/Z2
mode, this programming is disabled.	59