Sharp XE-A212 Text Programming, Department text item label 16 digits, 018 @, 1Item, Selection

A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 43

*1:Item:			Selection:		Entry:
	A	Footer printing*	Allow		1
			Disallow*		0
	B	Amount tendered entry*	Compulsory		1
			Non-compulsory (for X, Y and A)*		0
			Inhibit (for c and b)*		0
	C	Entry digit limit	For X, Y, c, b and A	0-8 (default:8)
			For r and o	0-9 (default:9)

*When programming for ror o, always enter 0 for A and B.

Footer printing (only for X, Y, c, band A)

•This programming decides whether or not the machine should print a message at the foot of a receipt when a specified media key is used. With regard to programming method of footer logo message, refer to “Logo messages” section on page 46.

Amount tendered entry (only for X, Y, c, band A)

•You may select amount tendered, compulsory or optional, for the A, Xand Ykeys.

•You may select amount tendered, compulsory or inhibited, for the cand bkeys.

Entry digit limit

•For the X,Y, c, b, rand okeys program upper limit entry amount for the tendered amount. For the Akey, program upper limit entry for total cash amount which can be handled on the register. The entry digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is

represented by the number of allowable digits for the maximum entry or total amount. When “0” is set, the operation of the corresponding key is prohibited.

Key operation example

018 @

X A

Print

From left, ABC

4Text Programming

The register allows you to program texts for department item names, PLU/subdepartment item names, function texts, clerk names, logo messages, foreign and domestic currency symbols, and training mode texts. Please refer to “Guidance for text programming” on page 31 as for how to entering characters.

When you press an appropriate number key (job code number) and press the Pkey for text entry just after you start programming with the skey, the cash register will automatically be ready for text entry.

Then a little after displaying guidance message indicating what programming you are in, the register may ask you to enter the first parameter, such as dept. code. Referring to the corresponding “Procedure”, enter a parameter and start character entries.

Department text (item label) (16 digits)

To keep current setting

s	1	P	Dept. key	Character keys	s	A
				(max.16 digits)
			Dept. code	d
			(1 to 50)

To program another dept.

43