Sharp XE-A212 Advanced Function Programming, Training mode text 12 digits, Register number

A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 48

Training mode text (12 digits)

For every receipts issued in the training mode, **TRAINING** is printed by default. When you want to change the text, follow the procedure below.

			To keep the current setting
					s	A
s	87	P		Character keys
				(max. 12 digits)
Key operation example					Print

s87 P S S TRAINING S S

s A

The programmed text is printed in double-size characters on the receipts issued in the training mode.

ADVANCED FUNCTION PROGRAMMING

1Register Number and Consecutive Number Programming

The register number and consecutive numbers are printed on every receipt or journal.

When your store has two or more registers, it is practical to set separate register numbers for identification. The consecutive number is increased by one each time a receipt is issued or when a journal print occurs.

For consecutive number programming, enter a number (max. 4 digits) that is one less than the desired starting number.

Register number

To set the register number “0”

s 1 @ Register number (one to six digits) sA

Key operation example Print

s 1 @

123456 s A

Register number

Consecutive number

			To begin the count from 0001
s	2	@		s	A
			A number (one to four digits) that is one
			less than the desired starting number

Key operation example

s 2 @

1000 s A

Print

Consecutive number

48