Silex technology SX-560 manual Command Description, Show Gpio Trigm

Command				Description
SET GPIO TRIGM <bit-mask>	Sets all trigger control bits. <bit-mask> is a 32-bit
	mask expressed in hex digits. The mask is encoded
	as follows:
	31	30	29	28	27	26	25	24
	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A
	23	22	21	20	19	18	17	16
	TRIG16	TRIG15	TRIG14	TRIG13	TRIG12	TRIG11	TRIG10	TRIG9
	GPIO8	GPIO7	GPIO6	GPIO5	GPIO4	GPIO3	GPIO2	GPIO1
	1 to 0	1 to 0 1 to 0		1 to 0 1 to 0		1 to 0 1 to 0		1 to 0
	15	14	13	12	11	10	9	8
	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A
	7	6	5	4	3	2	1	0
	TRIG8	TRIG7	TRIG6	TRIG5	TRIG4	TRIG3	TRIG2	TRIG1
	GPIO8	GPIO7	GPIO6	GPIO5	GPIO4	GPIO3	GPIO2	GPIO1
	0 to 1	0 to 1 0 to 1		0 to 1 0 to 1		0 to 1 0 to 1		0 to 1
	A value of 1 enables the corresponding GPIO
	trigger condition. A value of 0 disables the
	corresponding trigger condition. For example, a hex
	value of 4 enables a GPIO3 0 to 1 transition as a
	trigger.
	NOTE: Setting the trigger mask resets all undefined
	trigger strings for triggers that are enabled to the
	default trigger string value.
	NOTE: The trigger configuration is not changed by
	a configuration reset to default.
SHOW GPIO TRIGM	Shows all trigger control bits.

Example:

Local> set gpio trigm 00040006

Local> show gpio trigm

GPIO trigger mask = 00040006

Advanced Configuration

Silex

Part Number 140-00192-100

Page 55