Silex technology SX-560 manual String Commands, Enter LANGUAGE=, POSTSCRIPT\0A

SET SNMP LOCation	Sets system location string
	The default value is null.
	Format:
	SET SNMP LOCation <string>
SH SNMP	Shows state of SNMP protocol enable
	Sample output:
	SNMP is Enabled

*Not implemented in early releases of SX-560 firmware.

String Commands

	Table 39 String Commands
Command	Description
SET STRing	Set service string table entry
	String 1 to11 cannot be set or changed.
	Format:
	SET STRing <string #> ”value”
CL STRing	Clears the service string table entry
	Format:
	CL STRing <string #>
SH STRing	Defines the BOT and EOT strings used in services
[string_num]	If string_num is provided, then the specific string definition and expansion are
	displayed. If string_num is not provided, then all string definitions are displayed
	without their expansions.
	Sample output:
	1:
	2: \1BE
	3: \04
	4: \1B%-12345X
	5: @PJL
	6: ENTER LANGUAGE=
	7: PCL\0A
	8: POSTSCRIPT\0A
	9: \FF\04\FF\05\FF\06\FF\07
	10: \FF\04\FF\05\FF\06\FF\08
	11: \0C
SH FILters	Shows the filters that can modify a job stream
	Sample output:

Page 84

Silex

Part Number 140-00192-100

Console Commands