5. Select the appropriate wireless encryption mode and enter the required settings (check with your network administrator for the proper settings if you do not know them). Appendix A lists the possible encryption settings.
Click the Submit button at the bottom of the window (you may need to scroll) to save your changes.
Now click I/O Port on the left side of the screen to configure the serial ports, and then click either S1 to configure Serial Port 1 or S2 to configure Serial Port 2.
6. Configure the serial port settings so that they match the settings on your device. For example, if your device is set for 9600bps, odd parity, and XON/XOFF flow control, you must change the settings on the
Click the Submit button at the bottom of the window (you may need to scroll) to save your changes.
When you have finished with all your configuration changes, you must restart the
You can skip the remainder of this chapter.
Using the Internal Command Console to Configure the SX-560
You may skip this section if you have completely configured the
The Internal Command Console is a command line oriented method for configuring the
To use the Internal Command Console:
1.The simplest way to access the Internal Command Console is via a terminal (for example, a Windows PC running the HyperTerminal Accessory program) connected to serial port 2 or 3. If you are using the
Page 28
Silex
Part Number
Using the
