Silex technology SX-560 manual TLS Fast WPA-PSK

Command	Description
SET NW	Sets wireless authentication type
AUTHtype	The default value is Open System
	Format:
	SET NW AUTHtype [OPEN SHARED TTLS LEAP PEAP
	TLS FAST WPA-PSK ]
SH NW AUTH	Shows wireless authentication type
	Sample output:
	Authentication type= OPEN SYSTEM
SET NW	Sets number of times the SX-560 will attempt to authentication
AUTHTRY	The default value is 0.
	Format:
	SET NW AUTHTRY n
SH NW AUTHTRY	Shows number of authentication tries.
	Sample output:
	Authentication Try Count = 3
SET NW CHannel	Sets WLAN ad-hoc channel number
	The valid numbers are 1 through 11.
	Format:
	SET NW CHannel n
SET NW ENC	Sets WLAN Encryption Mode.
	Supported modes are None, 64 bit WEP, 128 bit WEP, WPA, WPA2, WPA2-WPA
	The default value is Disable.
	Format:
	SET NW ENC [Disable 64 128 WPA WPA2 ]
SH NW ENC	Shows the wireless encryption mode
	The deprecated command SH NW WEP also displays this information.
	Sample output:
	WiFi encryption is Disabled
SET NW KEY#	Selects the WLAN WEP key entry (the WEP key that will be used as the transmit
	key)
	The possible values are 1, 2, 3, or 4; the default value is 1.
	Format:
	SET NW KEY# n
SET NW KEYVAL	Sets the WLAN WEP key entry to the specified hex value
	For WEP128, the key is 10 hex characters long; for WEP128, the key is 26 hex
	characters long; the default value is null.
	Format:
	SET NW KEYVAL <key>

Page 74

Silex

Part Number 140-00192-100

Console Commands