Silex technology SX-560 manual Configuring the General Purpose I/O Gpio Lines, Snmp Configuration

Figure 15 SNMP Configuration

2.Click the Submit button to save the changes. You must then restart the SX-560 to make the changes take effect.

Configuring the General Purpose I/O (GPIO) Lines

The SX-560 module has eight General Purpose I/O (GPIO) lines available for use on connector J7. These GPIO lines are individually programmable for input, output, or special purpose. By default, six of the GPIO lines are configured for special purpose use.

Lines configured for input can be used as a source for SNMP traps and/or email alerts. The GPIO direction, trigger settings, and email/web page message strings are configured from the Internal Configuration Console interface.

Table 21 through 27 describe the GPIO Commands.

Page 50

Silex

Part Number 140-00192-100

Advanced Configuration