Silex technology SX-560 manual Gpio Transmit Commands Description, Gpio Data Commands

Table 23 GPIO Transmit Commands

Command		Description
SET GPIO TRANsmit <trigger #> <string>		Sets the string that will be included in an Email alert if
		the trigger is activated. These strings are also used to
		identify the trigger on the trap and alert web pages. This
		value overrides the default string created when the
		trigger is enabled, which is of the form “GPIO #<n> is
		01>”.
		<trigger #> is 1-16, and indicates the trigger condition
		for which the string is being set. The remainder of the
		line is taken as the string for the indicated trigger
		number.
SHOW GPIO TRANsmit		Displays the string that will be included in an Email alert
SHOW GPIO TRANsmit <trigger #>		if the trigger is activated. These strings are also used to
		identify the trigger on the trap and alert web pages.
		There are two forms -- one displays all strings, the other
		only shows the string corresponding to a specific trigger.
CL GPIO TRANsmit <trigger #>		Clears the transmit string for a specified trigger
		condition. If an Email alert is triggered for the condition,
		no text will be included in the alert.
		<trigger #> is 1-16, and indicates the trigger condition
		for which the string is being cleared.
		NOTE: If a new trigger condition is set, all undefined
		trigger conditions are reset to their default value.
Example:
Local> show gpio tran
Trig #	Email String
------	------------
0:	GPIO #1 is 1
1:	GPIO #2 is 1
Local> set gpio tran 0 your email text msg here
Local> show gpio tran
Trig #	Email String
------	------------
0:	your email text msg here
1:	GPIO #2 is 1

Local> show gpio tran 1 1: GPIO #1 is 1

Table 24 GPIO Data Commands

Page 56

Silex

Part Number 140-00192-100

Advanced Configuration