Silex technology SX-560 Retaining Bracket Optional, Antenna Connector Types Parameter Description

Table 15 Antenna Connector Types

Parameter	Description
Connector Type	SMT Ultra-miniature Coaxial Connector
	(U.FL)
Connector Size	Maximum height of 2.4 to 2.5 mm
Nominal Characteristic Impedance	50 Ohm
Rated Voltage	60 V AC (rms)
Rated Frequency	DC to 6 GHz
Contact Resistance	Center: 20 mOhm maximum
	Outside: 10 mOhm maximum
Insulation Resistance	500 mOhm @ 100 VDC minimum
Antenna Cable Plug	I-PEX 90 degrees plug with right angle
	receptacle and cable diameter at 1.32
	mm

For the antenna connector, the SX-560 module uses a Hirose U.FL-R-SMT (CL331-0471-0-01) ultra miniature coaxial receptacle. Note that you must use a special cable to meet FCC regulatory requirements (see next section).

The mating plugs are:

Hirose part number: U.FL-LP-066

www.hirose-connectors.com

Retaining Bracket (Optional)

For some applications, it is desirable to secure the radio card so that it does not accidentally eject from the SDIO card cage. Silex offers the 150-00192-100 retaining bracket as an optional accessory for these applications. This clip, which also reduces electromagnetic interference (EMI), is installed as shown in the picture below.

Figure 11 Retaining Bracket

Interfacing the SX-560

Silex

Part Number 140-00192-100

Page 43