Silex technology SX-560 manual Set Ip Ftp, SET IP Http, Set Ip Lpd, Auto Dhcp Static

Command		Description
	Format:
	SET IP FTIme	[ENable DIsable]
SET IP FTP	Enables or disables FTP protocol
	The default value is Enable.
	Format:
	SET IP FTP	[ENable DIsable]
SET IP HTTP	Enables or disables HTTP protocol
	The default value is Enable.
	Format:
	SET IP HTTP	[ENable DIsable]
SET IP	Sets interval in minutes for sending TCP keepalive packets on a connection
KEepalive*	The default value is 5 minutes.
	Format:
	SET IP KEepalive n
SET IP LPD	Enables or disables the LPD protocol
	The default value is Enable.
	Format:
	SET IP LPD	[ENable DIsable]
SET IP MEthod	Sets method of getting IP address
	The default value is Auto.
	Format:
	SET IP MEthod	[ AUTO DHCP STATIC ]
SET IP REtry	Enables or disables LPD retry on incomplete job
	The default value is Disable.
	Format:
	SET IP REtry	[ENable DIsable]
SET IP ROuter	Sets default router address
	The default value is 0.0.0.0.
	Format:
	SET IP ROuter	aa.bb.cc.dd
SET IP SUbnet	Sets IP subnet mask
	The default value is 0.0.0.0.
	Format:
	SET IP SUbnet	aa.bb.cc.dd
SET IP TCP	Enables or disables the raw TCP 9100 protocol
	The default value is Enable.
	Format:

Page 86

Silex

Part Number 140-00192-100

Console Commands