Silex technology SX-560 manual Snmp Commands Description, SET Snmp Getcomm

Command	Description
SET SERVI <service	Sets raw TCP port for service
name> TCP	If port number is 0, raw TCP is disabled on service.
	The default value is 9100 for service 1, 3001 for service 2.
	Format:
	SET SERVI <service name> TCP nn
SH SERVI SUMmary	Shows the basic parameters for a specific service. If service_num is not
[service_num]	provided, parameters for all services are displayed.
	The command SH SERVI displays the same data as SHOW SERVI SUM.

SNMP Commands

Table 38 SNMP Commands

Command		Description
SET SNMP GETCOMM*	Gets community name
	The default value is public.
	Format:
	SET SNMP GETCOMM	<string>
SET SNMP JETADmin	Enables or disables JetAdmin compatibility
	The default value is enabled.
	Format:
	SET SNMP JETADmin [ ENable DIsable]
SET SNMP	Sets community 1 name
SETCOMM1*	The default value is internal?
	Format:
	SET SNMP SETCOMM1 <string>
SET SNMP	Sets community 2 name
SETCOMM2*	The default value is Pass.
	Format:
	SET SNMP SETCOMM2 <string>
SET SNMP CONtact	Sets system contact string
	The default value is null.
	Format:
	SET SNMP CONtact	<string>

Console Commands

Silex

Part Number 140-00192-100

Page 83