SMC Networks SMC6709L2 manual Minimum Abbreviation, Getting Help on Commands

COMMAND LINE INTERFACE

Minimum Abbreviation

The CLI will accept a minimum number of characters that uniquely identify a command. For example, the command “show” can be entered as sh. If an entry is ambiguous, the system will display a help message.

Getting Help on Commands

You can display a brief description of the help system by entering the help command. The system will list the command groups as shown below.

INET>help
	help parameters:
advance	port	vlan	fdb	trkgrp
stp	qos	igmp	console

INET>

For a full list of the commands included in a group, enter the help command followed by a group name as shown below.

INET>help advance

	advance command:
config	ip X.X.X.X
config	subnet X.X.X.X
config	gateway X.X.X.X
enable	bsf <5,10,15,20,25>
disable	bsf
show	bsf
show	ip
show	mac
show	version
ping	<host_ip> <#times>
reboot
INET>

You can also display help for a specific command by entering the command keyword followed by the Enter key as shown below.

INET>enable
	enable parameters:
igmp	stp	qdlyb <1-255>	vlan {gvrp}
bsf <5,10,15,20,25>		security <1-10>	fdbage
lacpstate <1-8>		lacp <groupid:1~4>

sniffer <1-10> rx <portlist> tx <portlist> INET>

5-2