COMMAND LINE INTERFACE
System Configuration (advance)
The system configuration commands include the following items.
IP
config ip X.X.X.X
Sets the IP address for this device.
config subnet X.X.X.X
Sets the subnet mask for this device.
config gateway X.X.X.X
Sets the gateway for this device.
show ip
Displays IP address, subnet mask, and gateway.
ping <host_ip> <#times>
Sends ICMP echo request packets to another node.
Broadcast Storm Control
enable bsf <5,10,15,20,25>
Sets the broadcast threshold above which packets are dropped.
disable bsf
Disables broadcast storm control.
show bsf
Displays the broadcast storm control setting.
System Information
show mac
Displays the switch’s MAC address
show version
Displays the switch’s firmware and hardware versions
System Reset
config default
Resets the switch to the factory default settings
reboot
Restarts the switch
