Inter-Tel 3000
Administrator’s Manual
TO CONFIGURE LINE KEY LIGHTS
When a call is placed on System Hold, you can decide if the associated line key light is to flash or remain steady on all other digital telephone sets. The default setting is that the light flashes.
•From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.
•Select “System Programming”.
•Enter the System Programming Password and select “System”.
• Press the Scroll Down key ( ) until “Line Key Light” is displayed.
•Select “Line Key Light”.
•Choose either “Light Flashing On Hold” or “Light Steady On Hold”. Press the speakerphone key to finish programming.
TO PROHIBIT TRUNK-TO-TRUNK CALLS ON AN EXTENSION
You can prohibit individual extensions from activating External Forward, External Transfer and External Conference. (These features set up
•From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.
•Select “System Programming”.
•Enter the System Programming Password and select “Extensions”.
• Press the Scroll Down key ( ) until “External Diversion” is displayed and select.
•Select “No
•Select the extensions to be denied this feature. Those extensions denied the feature are indicated by a
“♦”.
Press the speakerphone key to finish programming.
TO MOVE A FAULTY EXTENSION
If an extension interface becomes faulty, you can swap its extension programming to a different extension. Calls for the faulty extension will be routed to the new extension.
•From the Programming extension, press the PROGRAM key.
•Select “System Programming”.
•Enter the System Programming password and select “Extensions”.
• Press the Scroll Down key ( ) until “Port Swapping” is displayed.
•Select “Port Swapping”.
•Select the faulty extension from the extension list.
•Select the new extension from the extension list. Press the speakerphone key to finish programming.
95
