Inter-Tel 3000
Administrator’s Manual
Accessing System Programming Options
System Programming options can also be programmed via a digital telephone set. However, the digital telephone set must be connected to the extension that is programmed as the programming extension. By default, the Programming extension is extension 20.
You access all System Programming options via the PROGRAM key on the digital telephone set connected to the programming extension.
•From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed. (The Scroll Up ( ) and Scroll Down ( ) keys can be used to scroll between the various screens).
•Select “System Programming”. Selecting “System Programming” from any extension other than the programming extension will result in the prompt “Programming Refused” being displayed.
The following screen is displayed:
Enter System Password
-Cancel
•Enter the System Programming Password, which is 1111 by default.
Note: You can also enter System Programming by dialing ##1111 at the programming extension and selecting “Send Digits”.
The following screen appears offering options to configure the overall system, the extensions, or the lines.
Select Option
-System
-Extensions
-Lines
•Under “System”, you will find the programming options that affect the system as a whole.
•Under “Extensions”, you will find the programming options that affect the extensions.
•Under “Lines”, you will find the programming options that affect the incoming lines.
119
