Glossary of Timers Recall on hold
This is the time that elapses before a call, which has been placed on hold, rings back the extension that put the call on hold.
Recall on transfer
This is the time that elapses before a call, which has been transferred and not answered, rings back the extension that attempted the transfer.
Forward on no answer
This is the time that elapses before a call ringing at an extension, with “Forward On No Answer” set, is forwarded.
Courtesy delay
This is the time that elapses before an unanswered incoming call is presented the courtesy message.
Open the door
This is the time that the Doorstrike relay will remain open following activation.
Door Phone ring duration
This is the time that extensions will ring when the Door Phone is pressed.
Call Park
This is the time that elapses before a call placed on “Call Park” rings back the parked call extension.
Ringback time duration
This is the time an extension will ring when Ringback has been invoked.
102
System VM Box delay
Programmable message length
AA Dial Time
Hunt Timer
Notification Delay
Notification Interval
01 - 300
30 - 300
01 - 05
001-300
0060-1800
060-900
Auto Attendant Night
04-30
Timers
Recall on hold
Recall on transfer
Forward on no answer
Courtesy delay
Open the door
Door Phone ring duration
Call park
Ringback time duration
Auto-Attendant Day
Range
001 - 1800
001 - 300
01 - 30
01 - 30
01 - 30
01 - 30
001 - 300
01 - 30
04- 30
Default setting 90 seconds
30 seconds
11 seconds
30 seconds
5 seconds
30 seconds
180 seconds
30 seconds
4 seconds (Immediate answer)
4 seconds (Immediate answer)
10 seconds
60 seconds
2 seconds
15 seconds
900 seconds
300 seconds
Press the speakerphone key to finish programming.
Confirm the new time.
Select the required timer to be changed and enter the duration.
Select “Timers”.
Press the Scroll Down key (
) until “Timers” is displayed.
Enter the System Programming Password and select “System”.
Select “System Programming”.
Press the Scroll Down key (
) until “System Programming” is displayed.
From the Programming extension, press the PROGRAM key.
You can set various timers from the programming extension to suit your requirements.
Programming System Timers
Inter-Tel 3000 Administrator’s Manual
Page 111
Image 111
Inter-Tel 3000 manual