SMC Networks SMC6709L2 manual Enter=Select Item

INITIAL CONFIGURATION

To assign an IP address to the switch, complete the following steps:

1. Navigate from the Main Menu to –

Switch Static Configuration, Administration Configuration, and then IP Configuration.

2.Select <Edit>, type in the IP Address, Subnet Mask, and Gateway. Press <Enter> after each item. Press <Ctrl-A> to return to the action bar at the bottom of the screen. Select <Save> and press any key to continue. (The IP addresses shown below are merely examples.)

	TigerSwitch 10/100 :	IP Configuration
	=====================
	IP Address	: 10.1.0.4
	Subnet Mask : 255.255.255.0
	Gateway	: 10.1.0.253
actions->	<Edit>	<Save>	<Quit>
	Select the action menu.
Tab=Next Item	BackSpace=Previous Item Quit=Previous menu		Enter=Select Item

3.Navigate back to the Main Menu, go to Reboot Switch menu, select the “Restart” command, and press <Enter>.

2-6