SMC Networks SMC6709L2 manual Pvid

SWITCH STATIC CONFIGURATION MENU

Console – Click Switch Static Configuration=>VLAN Configuration=> VLAN Configure. Set VLAN Mode to “802.1Q” or “802.1QwithGVRP.” Set the PVID and Ingress Filtering rules, and save your settings.

TigerSwitch 10/100 :		VLAN Support Configuraton
=====================
VLAN Mode :802.1Q
		IngressFilter1	IngressFilter2
Port	PVID	NonMember Pkt	Untagged Pkt
-------------------------------------------------------
1.	1	Drop	Forward
2.	1	Drop	Forward
3.	1	Drop	Forward
4.	1	Drop	Forward
5.	1	Drop	Forward
6.	1	Drop	Forward
7.	1	Drop	Forward
8.	1	Drop	Forward

actions->	<Quit>	<Edit>	<Save>	<Previous Page>		<Next Page>
		Select the Action menu.
Arrow/TAB/BKSPC = Move Item			Space = Toggle		Ctrl+A = Action menu

Click Switch Static Configuration=>VLAN Configuration=>Create a VLAN Group. Enter the VLAN Name (1-15 characters) and Group ID (2-4094). Select a protocol type if you want to create a protocol based VLAN. Use the Space bar to set each port to transmit tagged or untagged frames, then save your settings.

Add a VLAN Group

			--------------------------
	VLAN Name: [TPS			] VLAN ID: [2		](1~4094)
	Protocol VLAN :		None
	Port		Member
	------------------------
	1.		No
	2.		No
	3.		Tagged
	4.		UnTagged
	5.		UnTagged
	6.		No
	7.		No
	8.		No
actions->	<Quit>	<Edit>		<Save>	<Previous Page>		<Next Page>
		Select the Action menu.
Arrow/TAB/BKSPC = Move Item			Quit = Previous menu Enter = Select Item

4-23