SMC Networks SMC6709L2 manual Configuring the Aggregator Setting, Field Attributes

CONSOLE INTERFACE

Configuring the Aggregator Setting

First use the Port Configuration page to create trunk groups (page 4-16),and then use the Aggregator Setting page to enable LACP and specify the maximum number of active ports.

Field Attributes

•Group – Specifies the LACP trunk group.

•LACP – Set this field to “Enabled” when configuring a dynamic trunk.

•LACP Work Port Num – Specifies the number of active ports. If the number of active ports is less than the number of assigned members, excess ports will be placed in standby mode and only brought into service if an active link fails.

Console – Click Protocol Related Configuration=>LACP=>Aggregator Setting. Select the required trunk group, enable LACP, enter the number of active ports, and then save your settings.

TigerSwitch 10/100 :	LACP Group Configuration
=====================
Group	LACP	LACP Work Port Num
------------------------------------------
Trk1.	Enabled	2

actions->	<Edit>	<Save>	<Quit>
	Select the action menu.
Arrow/TAB/BKSPC = Move Itemem		Quit = Previous menurl+Enter = Select Item

4-48