SMC Networks SMC6709L2 manual Connecting to the Switch, Configuration Options

CHAPTER 2 INITIAL CONFIGURATION

Connecting to the Switch

Configuration Options

The switch includes a built-in network management agent. The agent offers a variety of management options, including SNMP, RMON, and a Web-based interface. A PC may also be connected directly to the switch for configuration and monitoring via the console menu.

Note: The IP address for this switch is unassigned by default. To change this address, see “Setting an IP Address” on page 2-5.

The switch’s HTTP Web agent allows you to configure switch parameters, monitor port connections, and display statistics using a standard Web browser such as Netscape Navigator version 6.2 and higher or Microsoft IE version 5.0 and higher. The switch’s Web management interface can be accessed from any computer attached to the network.

The switch’s management agent is based on SNMP (Simple Network Management Protocol). This SNMP agent permits the switch to be managed from any system in the network using management software, such as SMC’s free EliteView software.

The console menu can be accessed by a direct connection to the RS-232 serial console port on the switch, or remotely by a Telnet connection over the network.

2-1