SMC Networks SMC6709L2 manual Configuring Address Filtering

CONSOLE INTERFACE

Configuring Address Filtering

Use the Filtering MAC Address page to drop traffic from unwanted stations based on the source MAC address (and associated VLAN if tagged VLANs are enabled).

Field Attributes

•MAC Address – Source MAC address.

•Vlan ID – ID of configured VLAN (1-4094). This option is only available if IEEE 802.1Q tagged VLANs are enabled (page 4-22).

Console – Click Switch Static Configuration=>MAC Address Configuration=>Filtering MAC Address. Click <Add> to open the Add Filter MAC Address page. Enter a MAC address and associated VLAN, then save your settings.

TigerSwitch 10/100 :	Add Filter MAC Address
=====================
Mac Address :00E0299434DE
Vlan ID	:2

actions->	<Edit>	<Save>	<Quit>
	Save successfully!Press any key to return!
Arrow/TAB/BKSPC = Move Item		Quit = Previous menuu	Enter = Select Itemm

After you configure a new address, it will be displayed on the Filter MAC Address Configuration page as shown below.

TigerSwitch 10/100 :		Filter MAC Address Configuration
=====================
Mac Address	Vlan ID	Mac Address Vlan ID
-------------------------------		-------------------------------
00E0299434DE	2

actions->	<Add>	<Edit>	<Delete>	<Save>	<Quit>
	Add/Edit/Delete		filter MAC addresses.
Arrow/TAB/BKSPC = Move Item		Quit	= Previous menu	Enter = Select Item

4-28