Changing the menu settings

Note on AUDIO MODE (DCR-TRV140E only)

When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO MIX.

Notes on ORC setting (CCD-TRV107E/TRV108E/TRV208E/TRV408E only)

•Each time you eject the cassette, the ORC setting will be cancelled. If necessary, set the setting.

•You cannot use this setting on a tape with the red mark on the cassette exposed. (i. e. the tape is write-protected)

•When you set ORC TO SET, a non-recorded section of about 0.1 second appears on the tape. However, note that this non-recorded section disappears from the tape when you continue recording from this section.

•To check if you have already set the ORC setting, select ORC TO SET in the menu settings. “ORC ON” is displayed if ORC TO SET is already set.

aanpassen inzicht eigen naar camcorder Uw Camcorder Your Customising

141