Types of trouble and how to correct trouble

Others

Symptom

Cause and/or Corrective Actions

The title is not recorded.

• The cassette has no cassette memory.

 

c Use a cassette with cassette memory. (p. 130)

 

• The cassette memory is full.

 

c Erase unwanted title. (p. 133)

 

• The cassette is set to prevent accidental erasure.

 

c Slide the write-protect tab so that red portion is not visible.

 

(p. 34)

 

• The tape has a blank portion between recorded portions.

 

c Superimpose the title to a recorded portion. (p. 130)

The cassette label is not recorded. • The cassette has no cassette memory.

cUse a cassette with cassette memory. (p. 137)

•The cassette memory is full.

cErase unwanted titles. (p. 133)

•The cassette is set to prevent accidental erasure.

cSlide the write-protect tab so that red mark is not visible. (p. 34)

Digital program editing to a tape • The input selector on the VCR is not set correctly.

does not function.c Check the connection and set the input selector on the VCR again (p. 104)

•The camcorder is connected to DV equipment of other than Sony using the i.LINK cable (DV connecting cable).

c Set it to IR (p. 111).

•Setting programme on a blank portion of the tape is attempted. c Set the programme again on a recorded portion (p. 115).

•The camcorder and the VCR are not synchronised.

cAdjust the synchronization (p. 113).

•The IR SETUP code is incorrect.

cSet the correct code (p. 107).

Digital program editing to a

• Setting programme on a blank portion of the tape is attempted.

“Memory Stick” does not

c Set the programme again on a recorded portion (p. 175).

function.*1)

 

The Remote Commander supplied

• COMMANDER is set to OFF in the menu settings.

with your camcorder does not work.

c Set it to ON. (p. 242)

 

• Something is blocking the infrared rays.

 

c Remove the obstacle.

 

• The batteries are inserted in the battery holder with the + –

 

polarities incorrectly matching the + – marks.

 

c Insert the batteries correctly. (p. 299)

 

• The batteries are dead.

 

c Insert new ones. (p. 299)

The picture from a TV or VCR does

• DISPLAY is set to V-OUT/LCD in the menu settings.

not appear even when your

c Set it to LCD. (p. 242)

camcorder is connected to output on

 

the TV or VCR.*2)

 

*1) Except DCR-TRV16E/TRV116E

*2) DCR-TRV25E/TRV27E/TRV116E/TRV118E only

(continued on the following page)

неисправностей устранение и Поиск Troubleshooting

257