Settings

Do not change settings from both the NSR unit and RealShot Manager Controller at the same time.

When registering multiple cameras at once, an error message appears if any of the settings are configured improperly. Only the cameras configured correctly will be registered. Cameras that have not been configured correctly will reappear on the list, so you will need to register them again.

If you change the mount angle of a camera after configuring a motion detection area with the NSR, the motion detection area does not change accordingly. You must reconfigure the motion detection area.

You cannot use quotation marks (“) when naming a preset, but you can name a preset using only spaces. Be aware, however, that presets named using only spaces appear as if they have not been configured when displayed.

When you change the mount angle (from 90 degrees to 270 degrees for example) in the “Main” settings of the “Camera” screen, the aspect ratios of preview images that appear when searching for and exporting recorded images do not display correctly. The aspect ratios display correctly, however, when the recorded images are played back or when the exported movies or still images are stored on media.

When you add a camera and assign it to a monitor window displaying images with a “No Camera” status under the default monitor layout, the display does not automatically switch over to the images from the assigned camera. To display the images from the assigned camera in the monitor window, switch the monitor layout.

Even when “Send Still Image” is selected as an action setting under “Report By Mail,” still images will not be attached in the following cases.

-Video codec for the camera sending the still image is not set to JPEG

-Masking is configured on the camera sending the still image

-Still image capture failed due to high processing load

When you click [Register] during multiple camera registration, a message indicating that registration is in progress appears along with a [Cancel] button. The [Cancel] button is not for cancelling camera registration mid-progress. If an error occurs while registration is in progress, the [Cancel] button is used to close the message window. It is not used under normal circumstances.

When editing and saving user settings in the Configuration window, reenter the password even if you do not wish to change it. When the password is saved correctly, the password text box appears empty. Be aware that this does not signify a “no password” status.

During multiple camera registration, an error message may appear while configuring camera settings. This may mean that you have not set a user name or password, so be sure to confirm.

When a PAL camera is connected to the SNT-V704, the maximum resolution on the “Main” screen is shown as “720 × 480,” but this corresponds to “720 × 576” on the SNT-V704.

With a PAL camera, the position of a motion detection area may shift. Make sure to configure the motion detection area before using motion detection.

Option Window

When the system alert detects a VIDEO LOSS, the event is recorded in the System Log. You cannot confirm the camera for which the VIDEO LOSS occurred by name with the System Log. To confirm the camera name, open the corresponding log record in the Alarm Log.

Exporting

The NSR does not include a function to format CD/DVD media to be used for exporting or a function to make them blank. Use media that is already blank.

Miscellaneous 178