When using external media, do not insert a CF (CompactFlash) card and USB memory device at the same time.

When exporting recorded image or log files, an export in progress is cancelled if you click [Abort] in the Status dialog box. A warning message to confirm cancellation does not appear. The export will be cancelled once copying of the file that was to be exported completes.

The NSR supports the following external media formats.

-CF (CompactFlash) (only NSR-100/50)

-USB memory

-CD-R/RW

-DVD-R (only NSR-100/50)

-DVD+R (only NSR-100/50)

Caution

Depending on the external media, it may not be supported.

Errors may occur when writing onto CD/DVD media.

If an error occurs, do not eject the CD/DVD, and try writing onto it again.

Do not write on media that has been previously written on.

If an error occurs while writing for the second time, previously written data may become unreadable.

DL (Dual Layer) DVDs are not supported.

When multiple files are written onto a CD/DVD with the NSR, only a portion of the files may be readable, depending on the CD/DVD drive or OS (Operating System). (Confirm multi session and multi border support.)

System Menu

Second monitors continue to display images while you use the Setup Menu and during shutdown and reboot procedures.

When a route setting for a port that does not have a network cable connected to it is configured during network configuration in the Setup Menu, an error message indicating that the network is unreachable appears. Connect the network cable before configuring the settings.

When creating host and server names for the NSR with the Setup Wizard or Setup Menu, use only alphanumeric characters, underscores (_), and hyphens (-).

Remote Control Operations

You can operate the export function from a remote control unit, but the operation may be difficult without the aid of a mouse.

If you use the mouse or F1 key on the remote control unit to switch the Option window to a mode other than Camera Control in the middle of performing pan and tilt operations with the remote control unit, the camera may continue to pan and tilt on its own. Reset the Option window to Camera Control and operate the joystick to regain control of the camera.

When you press the SHIFT button on the remote control unit, the SHIFT LOCK LED lights blue, and the Shift Lock function is enabled. Be aware that the functions printed below each button are active in this state. (This does not include the numeric keys and the CANCEL, ENTER, and CAMERA SELECT buttons.)

You cannot move columns in lists such as those displayed in the Option window with the remote control unit. Use a mouse to select and sort columns.

When the NSR is experiencing a high processing load, some remote control operations may not register immediately. These operations may later execute all at once.

When a monitor window with no camera assigned to it (“No Camera” status displayed) is selected in a multiple window layout, pressing the [1×1] button

Miscellaneous 179