Southbend SB1051 owner manual Chuck Installation, To install the chuck

Models: SB1051

1 136
Download 136 pages 2.33 Kb
Page 34
Image 34

 

O P E R A T I O N

 

13" x 40" Heavy 13® EVS Lathe

For Machines Mfg. Since 5/11

 

 

 

Chuck Installation

To ensure accurate work, it is extremely important to make sure the spindle nose and chuck mating surfaces/tapers are clean. Even a small amount of lint or debris can affect accuracy.

The chuck is properly installed when all camlocks are tight, the spindle and chuck tapers firmly lock together, and the back of the chuck is firmly seated against the face of the spindle all the way around—without any gaps.

To install the chuck:

1.DISCONNECT LATHE FROM POWER!

2.Use an appropriate lifting, support, or protective device to protect the ways and support the chuck during the installation process.

3.Clean and lightly oil the camlock studs, then thoroughly clean the mating surfaces of the spindle and chuck.

4.Install the chuck by inserting the camlock studs straight into the spindle cam holes.

5.Incrementally tighten the camlocks in a criss-cross or star pattern to ensure that the chuck seats evenly against the spindle.

6.When the chuck is fully seated and all the camlocks are tight, verify that the cam line is between the two "V" marks on the spindle nose, as shown in the following figure.

Cam line between “V”s

Figure 28. Cam line positioned between the "V" marks

after the camlocks are fully tightened.

If the cam line is NOT between the "V" marks when the camlock is tight, the stud may be installed at the incorrect height. To fix this, adjust the stud height as shown in the following figure. Make sure to re-install the stud cap screw afterward.

Important: Avoid inserting the studs by pivoting them in from an angle or rotating the spindle. This can damage studs or spindle cam holes.

CORRECT

INCORRECT

Figure 27. Inserting camlock studs into spindle cam

holes.

If adjusting the stud height does not correct the problem, try swapping stud positions on the chuck.

INCORRECT

INCORRECT

Stud Too High:

Stud Too Low:

Turn In

Turn Out

One-Turn

One-Turn

Figure 29. Correcting an improperly installed stud.

-32-

Page 34
Image 34
Southbend SB1051 owner manual Chuck Installation, To install the chuck

SB1051 specifications

The Southbend SB1051 is a highly regarded gas range designed for commercial kitchens, embodying quality and efficiency in its construction and functionalities. This robust cooking appliance is specifically engineered to meet the high demands of professional chefs and food establishments, making it an ideal choice for restaurants, cafes, and catering services.

One of the standout features of the Southbend SB1051 is its powerful cooking capabilities. It boasts a total of five open gas burners, each delivering substantial heat output to ensure quick and consistent cooking results. The burners are designed for durability, featuring cast iron grates that provide excellent heat retention and stability for pots and pans. The heat output is generally rated at 30,000 BTUs per burner, making this range suitable for everything from boiling to sautéing and simmering.

In addition to its burners, the SB1051 integrates an impressive oven system. The range includes a standard oven capable of reaching high temperatures for baking and roasting. This oven is designed with heavy-duty construction and features a sturdy door that can withstand the rigors of daily use. Furthermore, it may come with adjustable racks, providing flexibility in cooking different types of dishes simultaneously.

The Southbend SB1051 places a strong emphasis on safety and ease of use. It includes an electronic ignition system that eliminates the need for matches or manual lighting, reducing the risk of accidents in busy kitchen environments. The range also features convenient heat controls, allowing chefs to adjust the temperature efficiently and precisely. The stainless-steel front and sides not only enhance the body’s durability but also make cleaning and maintenance simpler.

Moreover, this range is engineered with practical ergonomics in mind. Its height and depth are designed to optimize the workflow in the kitchen, ensuring that chefs can work comfortably without straining.

In summary, the Southbend SB1051 gas range stands out for its robust construction, powerful burners, and user-friendly features. With its combination of high-performance cooking technology and safety considerations, it is an exceptional investment for anyone looking to enhance their culinary operations. This range sets a high standard in commercial cooking equipment, delivering efficiency and reliability to meet the demands of any professional kitchen.