Southbend SB1051 owner manual Power Supply Requirements, Availability, Full-Load Current Rating

Models: SB1051

1 136
Download 136 pages 2.33 Kb
Page 18
Image 18

 

P R E P A R A T I O N

 

13" x 40" Heavy 13® EVS Lathe

For Machines Mfg. Since 5/11

 

 

 

Power Supply

Requirements

Availability

Before installing the machine, consider the availability and proximity of the required power supply circuit. If an existing circuit does not meet the requirements for this machine, a new circuit must be installed.

To minimize the risk of electrocution, fire, or equipment damage, installation work and electrical wiring must be done by an electrician or qualified service personnel in accordance with all applicable codes.

Serious injury could occur if you connect the machine to power before completing the setup process. DO NOT connect to power until instructed later in this manual.

Full-Load Current Rating

The full-load current rating is the amperage a machine draws at 100% of the rated output power. On machines with multiple motors, this is the amperage drawn by the largest motor or sum of all motors and electrical devices that might operate at one time during normal operations.

Full-Load Rating

15.7 Amps

For your own safety and protection of property, consult an electrician if you are unsure about wiring practices or applicable electrical codes.

The full-load current is not the maximum amount of amps that the machine will draw. If the machine is overloaded, it will draw additional amps beyond the full-load rating.

If the machine is overloaded for a sufficient length of time, damage, overheating, or fire may result—especially if connected to an undersized circuit. To reduce the risk of these hazards, avoid overloading the machine during operation and make sure it is connected to a power supply circuit that meets the requirements in the following section.

Circuit Requirements

This machine is prewired to operate on a 220V power supply circuit that has a verified ground and meets the following requirements:

Nominal Voltage

............................... 220V/240V

Cycle

60 Hz

Phase

3-Phase

Circuit Rating

20 Amps

Cord

"S" Type, 4-Wire, 12 AWG, 300 VAC

Plug/Receptacle

NEMA 15-20

A power supply circuit includes all electrical equipment between the main breaker box or fuse panel in your building and the incoming power connections inside the machine. This circuit must be safely sized to handle the full-load current that may be drawn from the machine for an extended period of time. (If this machine is connected to a circuit protected by fuses, use a time delay fuse marked D.)

Note: The circuit requirements in this manual are for a dedicated circuit—where only one machine will be running at a time. If this machine will be connected to a shared circuit where multiple machines will be running at the same time, consult a qualified electrician to ensure the circuit is properly sized.

-16-

Page 18
Image 18
Southbend SB1051 owner manual Power Supply Requirements, Availability, Full-Load Current Rating, Circuit Requirements

SB1051 specifications

The Southbend SB1051 is a highly regarded gas range designed for commercial kitchens, embodying quality and efficiency in its construction and functionalities. This robust cooking appliance is specifically engineered to meet the high demands of professional chefs and food establishments, making it an ideal choice for restaurants, cafes, and catering services.

One of the standout features of the Southbend SB1051 is its powerful cooking capabilities. It boasts a total of five open gas burners, each delivering substantial heat output to ensure quick and consistent cooking results. The burners are designed for durability, featuring cast iron grates that provide excellent heat retention and stability for pots and pans. The heat output is generally rated at 30,000 BTUs per burner, making this range suitable for everything from boiling to sautéing and simmering.

In addition to its burners, the SB1051 integrates an impressive oven system. The range includes a standard oven capable of reaching high temperatures for baking and roasting. This oven is designed with heavy-duty construction and features a sturdy door that can withstand the rigors of daily use. Furthermore, it may come with adjustable racks, providing flexibility in cooking different types of dishes simultaneously.

The Southbend SB1051 places a strong emphasis on safety and ease of use. It includes an electronic ignition system that eliminates the need for matches or manual lighting, reducing the risk of accidents in busy kitchen environments. The range also features convenient heat controls, allowing chefs to adjust the temperature efficiently and precisely. The stainless-steel front and sides not only enhance the body’s durability but also make cleaning and maintenance simpler.

Moreover, this range is engineered with practical ergonomics in mind. Its height and depth are designed to optimize the workflow in the kitchen, ensuring that chefs can work comfortably without straining.

In summary, the Southbend SB1051 gas range stands out for its robust construction, powerful burners, and user-friendly features. With its combination of high-performance cooking technology and safety considerations, it is an exceptional investment for anyone looking to enhance their culinary operations. This range sets a high standard in commercial cooking equipment, delivering efficiency and reliability to meet the demands of any professional kitchen.