O P E R A T I O N

 

For Machines Mfg. Since 5/11

13" x 40" Heavy 13® EVS Lathe

 

 

 

Alternate Configuration

Use the alternate end gear configuration for cutting modular or diametral threads. The 57T end gear is positioned on the outside so that it meshes with the 44T transposing gear instead of the 56T gear, as illustrated in Figure 71.

24T

56T

44T

Modular and Diametral

Pitch Turning

57T

Figure 71. Alternate end gear configuration.

4.Loosen the pivot hex nut shown in Figure 72, then swing the pivot arm to the left so that 44T/56T gears are away from the 57T gear. Hand tighten the hex nut to keep the arm in place.

5.Use a stiff brush and mineral spirits to clean away the debris and grime from the gears and shafts, then lubricate these devices as instructed in the End Gears lubrication subsection on Page 70.

6.Making sure to keep the key seated in the shaft, remove the spacer and the 57T gear, then re-install them as follows:

—For the standard end gear configuration, slide the 57T gear on first, then the spacer on the outside.

—For the alternate end gear configuration, slide the spacer on first, then the gear.

Configuring End Gears

 

Tools Needed

Qty

Hex Wrench 6mm

1

Wrench 22mm

1

To configure the end gears:

1.DISCONNECT LATHE FROM POWER!

2.Remove the headstock end gear cover.

3.Remove the cap screw, lock washer, and flat washer from the 57T end gear (see Figure 72).

Pivot

Hex Nut

Cap Screw,

Washers & Spacer

Figure 72. End gear components.

7.Re-install the cap screw, lock washer, and flat washer you removed in Step 3 to secure the spacer and 57T gear.

Note: DO NOT overtighten the cap screw— it merely holds the gear in place. Overtightening it will make it harder to remove later and may restrict the rotation of the gears.

8.Slide the pivot arm back in place to mesh the gears, keeping approximately 0.002" play between the gears, then retighten the pivot hex nut.

9.Replace and secure the end gear cover before connecting the lathe to power.

-53-

Page 54 Page 56
Page 55
Image 55
Southbend SB1051 owner manual Alternate Configuration, Configuring End Gears, To configure the end gears, Tools Needed Qty
Page 54 Page 56

SB1051 specifications

The Southbend SB1051 is a highly regarded gas range designed for commercial kitchens, embodying quality and efficiency in its construction and functionalities. This robust cooking appliance is specifically engineered to meet the high demands of professional chefs and food establishments, making it an ideal choice for restaurants, cafes, and catering services.

One of the standout features of the Southbend SB1051 is its powerful cooking capabilities. It boasts a total of five open gas burners, each delivering substantial heat output to ensure quick and consistent cooking results. The burners are designed for durability, featuring cast iron grates that provide excellent heat retention and stability for pots and pans. The heat output is generally rated at 30,000 BTUs per burner, making this range suitable for everything from boiling to sautéing and simmering.

In addition to its burners, the SB1051 integrates an impressive oven system. The range includes a standard oven capable of reaching high temperatures for baking and roasting. This oven is designed with heavy-duty construction and features a sturdy door that can withstand the rigors of daily use. Furthermore, it may come with adjustable racks, providing flexibility in cooking different types of dishes simultaneously.

The Southbend SB1051 places a strong emphasis on safety and ease of use. It includes an electronic ignition system that eliminates the need for matches or manual lighting, reducing the risk of accidents in busy kitchen environments. The range also features convenient heat controls, allowing chefs to adjust the temperature efficiently and precisely. The stainless-steel front and sides not only enhance the body’s durability but also make cleaning and maintenance simpler.

Moreover, this range is engineered with practical ergonomics in mind. Its height and depth are designed to optimize the workflow in the kitchen, ensuring that chefs can work comfortably without straining.

In summary, the Southbend SB1051 gas range stands out for its robust construction, powerful burners, and user-friendly features. With its combination of high-performance cooking technology and safety considerations, it is an exceptional investment for anyone looking to enhance their culinary operations. This range sets a high standard in commercial cooking equipment, delivering efficiency and reliability to meet the demands of any professional kitchen.
Top Page Image Contents