S E R V I C E

 

13" x 40" Heavy 13® EVS Lathe

For Machines Mfg. Since 5/11

 

 

 

Brake & Switch

As the brake lining wears, the foot pedal develops more travel. If the brake band is not adjusted to compensate for normal wear, the limit switch will still turn the lathe off, but the spindle will not stop as quickly. It is especially important that the brake is kept properly adjusted so you can quickly stop the spindle in an emergency.

Tools Needed:

Qty

Phillips Screwdriver #2

........................................ 1

Hex Wrench 6mm

1

To adjust the brake and brake switch:

1.DISCONNECT LATHE FROM POWER!

2.Put on a respirator and eye protection to protect yourself from hazardous brake dust.

3.Remove the motor access panel from the left cabinet.

4.Measure the remaining brake band lining at the thinnest point, which is usually at the 8 o'clock position, as shown in Figure 126.

3mm

Figure 126. Minimum brake belt thickness.

When the brake band is new, the lining is approximately 6mm thick. If the lining thickness wears to 3mm or less, the brake band must be replaced. Otherwise, the rivets that secure the lining to the band will soon grind into the brake hub. If the hub becomes damaged, it must be replaced.

5.Remove the pedal stop shown in Figure 127.

Pedal Lever

Brake Belt

Band

Pedal Stop

Figure 127. Brake belt adjustment components.

6.Move the brake band to the right one hole, and re-install the pedal stop, tightening the cap screw until it is just snug.

Note: If installing a new brake band, install the cap screw so there is one hole to the left for future brake adjustment.

7.Firmly push the pedal lever to the right until it stops and the brake band is fully clamped around the brake hub.

8.Tap the pedal stop into position so there is approximately a 25mm gap between the pedal lever and the stop (see Figure 128), then firmly tighten the pedal stop cap screw.

Pedal

 

Pedal

Stop

 

Lever

 

 

 

 

 

Figure 128. Brake pedal travel adjustment.

-78-

Page 80
Image 80
Southbend SB1051 owner manual Brake & Switch, To adjust the brake and brake switch

SB1051 specifications

The Southbend SB1051 is a highly regarded gas range designed for commercial kitchens, embodying quality and efficiency in its construction and functionalities. This robust cooking appliance is specifically engineered to meet the high demands of professional chefs and food establishments, making it an ideal choice for restaurants, cafes, and catering services.

One of the standout features of the Southbend SB1051 is its powerful cooking capabilities. It boasts a total of five open gas burners, each delivering substantial heat output to ensure quick and consistent cooking results. The burners are designed for durability, featuring cast iron grates that provide excellent heat retention and stability for pots and pans. The heat output is generally rated at 30,000 BTUs per burner, making this range suitable for everything from boiling to sautéing and simmering.

In addition to its burners, the SB1051 integrates an impressive oven system. The range includes a standard oven capable of reaching high temperatures for baking and roasting. This oven is designed with heavy-duty construction and features a sturdy door that can withstand the rigors of daily use. Furthermore, it may come with adjustable racks, providing flexibility in cooking different types of dishes simultaneously.

The Southbend SB1051 places a strong emphasis on safety and ease of use. It includes an electronic ignition system that eliminates the need for matches or manual lighting, reducing the risk of accidents in busy kitchen environments. The range also features convenient heat controls, allowing chefs to adjust the temperature efficiently and precisely. The stainless-steel front and sides not only enhance the body’s durability but also make cleaning and maintenance simpler.

Moreover, this range is engineered with practical ergonomics in mind. Its height and depth are designed to optimize the workflow in the kitchen, ensuring that chefs can work comfortably without straining.

In summary, the Southbend SB1051 gas range stands out for its robust construction, powerful burners, and user-friendly features. With its combination of high-performance cooking technology and safety considerations, it is an exceptional investment for anyone looking to enhance their culinary operations. This range sets a high standard in commercial cooking equipment, delivering efficiency and reliability to meet the demands of any professional kitchen.