Maintenance Schedule

	M A I N T E N A N C E
13" x 40" Heavy 13® EVS Lathe	M A I N T E N A N C E	For Machines Mfg. Since 5/11

!	Always disconnect power
!	to the machine before
	performing maintenance.
	Failure to do this may result
	in electrocution or accidental
	startup injury.

For optimum performance from this machine, this maintenance schedule must be strictly followed. We strongly recommend all operators make a habit of following the daily maintenance procedures. Use the chart provided on Page 63 to help ensure this is done.

Ongoing

The condition of machine components should be carefully observed at all times to minimize the risk of injury or machine damage. If any of the conditions below are observed, stop the lathe immediately, disconnect power, and correct the condition before resuming operations:

ss ,OOSEOMOUNTING BOLTS ORIFASTENERS

ss7ORNRFRAYEDFCRACKED ORDAMAGEDAWIRES ss 'UARDS REMOVED

ss 34/0 BUTTONBNOTTWORKING CORRECTLYWOR NOT requiring you to reset it before starting the machine again.

ss !!REDUCTIONUIN BRAKING SPEED ORBEFFICIENCY ss /ILILEVELLNOTVVISIBLENIN THE SIGHT GLASSES

ss #OOLANTLNOTNFLOWINGOOUT WHEN COOLANT SWITCHU is ON and the valve is open.

ss Damaged or malfunctioning components.

Daily, Before Operations

ss#HECKADDKHEADSTOCK OILEPage 64). ss #HECKADDKGEARBOXDOILGPage 66). ss #HECKADDKAPRONDOIL Page 67).

ss #HECKADDKCOOLANTDPage 71). ss ,UBRICATEITHEAWAYS Page 68).

ss !DDDOIL TO THE BALLOOILERS Page 69).

ss #LEANLUBRICATEUTHERLEADSCREWEPage 68). ss $ISENGAGENTHEAFEED SELECTION LEVER ON THEE apron (to prevent crashes upon startup).

ss %NSURE CARRIAGECLOCK BOLTAIS LOOSE

Daily, After Operations

ss$EPRESSR34/0 BUTTON4AND0SHUT OFF the master power switch (to prevent accidental startup).

ss6ACUUMCLEAN ALL CHIPS AND SWARF FROMHBED slides, and chip drawer.

ss7IPE DOWN ALLOUNPAINTEDLOR MACHINEDA surfaces with an oiled rag.

Monthly

ss$RAINAANDNCLEANNTHE COOLANTATANKTTHEN ADD new ﬂuid (Page 71).

Annually

ss#HANGE THE HEADSTOCK OIL Page 64). ss #HANGE THE APRON OIL Page 67).

ss #HANGE THE GEARBOX OIL Page 66). ss ,UBRICATEIENDAGEARS Page 70). ss #HECKLEVELBEDWAY Page 22).

Cleaning & Protecting

Regular cleaning is one of the most important steps in taking care of this lathe. We recommend planning a cleaning routine into the workflow schedule, so that adequate time is set aside to do the job right.

Typically, the easiest way to clean swarf from the bed ways and chip drawer is to use a wet/dry shop vacuum that is dedicated for this purpose. Small chips left over after vacuuming can be wiped up with a slightly oiled rag. Avoid using compressed air to blow off chips, as it may drive them deeper into moving surfaces and could cause sharp chips to fly into your face or hands.

All unpainted and machined surfaces should be wiped down daily to keep them rust-free and in top condition. This includes any surface that is vulnerable to rust if left unprotected (especially any parts that are exposed to water-soluble coolant). Typically, a thin ﬁlm of oil is all that is necessary for protection.

-62-

SB1051 specifications

The Southbend SB1051 is a highly regarded gas range designed for commercial kitchens, embodying quality and efficiency in its construction and functionalities. This robust cooking appliance is specifically engineered to meet the high demands of professional chefs and food establishments, making it an ideal choice for restaurants, cafes, and catering services.

One of the standout features of the Southbend SB1051 is its powerful cooking capabilities. It boasts a total of five open gas burners, each delivering substantial heat output to ensure quick and consistent cooking results. The burners are designed for durability, featuring cast iron grates that provide excellent heat retention and stability for pots and pans. The heat output is generally rated at 30,000 BTUs per burner, making this range suitable for everything from boiling to sautéing and simmering.

In addition to its burners, the SB1051 integrates an impressive oven system. The range includes a standard oven capable of reaching high temperatures for baking and roasting. This oven is designed with heavy-duty construction and features a sturdy door that can withstand the rigors of daily use. Furthermore, it may come with adjustable racks, providing flexibility in cooking different types of dishes simultaneously.

The Southbend SB1051 places a strong emphasis on safety and ease of use. It includes an electronic ignition system that eliminates the need for matches or manual lighting, reducing the risk of accidents in busy kitchen environments. The range also features convenient heat controls, allowing chefs to adjust the temperature efficiently and precisely. The stainless-steel front and sides not only enhance the body’s durability but also make cleaning and maintenance simpler.

Moreover, this range is engineered with practical ergonomics in mind. Its height and depth are designed to optimize the workflow in the kitchen, ensuring that chefs can work comfortably without straining.

In summary, the Southbend SB1051 gas range stands out for its robust construction, powerful burners, and user-friendly features. With its combination of high-performance cooking technology and safety considerations, it is an exceptional investment for anyone looking to enhance their culinary operations. This range sets a high standard in commercial cooking equipment, delivering efficiency and reliability to meet the demands of any professional kitchen.

Southbend SB1051 owner manual Maintenance Schedule

Models: SB1051