Tandberg Data 600 manual Conventions, For More Information, Element Convention Example

SDLT 600 Product Manual Chapter 1: Introduction

•Appendix B, “DLTtape VS1 Data Cartridge,” provides information for the DLTtape™ VS data cartridge including handling and inspection procedures, information on the write-protect switch, and how to load and unload a data cartridge.

•“Glossary” provides definitions for technical terms and acronyms used throughout the document.

1.5Conventions

This manual uses the following conventions to designate specific elements.

Table 1-1.Typographical Conventions

Element	Convention	Example
Commands	Uppercase (unless case-sensitive)	FORMAT UNIT
Messages	Uppercase	INVALID PRODUCT
		NUMBER
Hexadecimal Notation	Number followed by lowercase h	25h
Binary Notation	Number followed by lowercase b	101b
Decimal Notation	Number without suffix	512
Acronyms	Uppercase	POST
Abbreviations	Lowercase, except where standard	Mb (megabits)
	usage requires uppercase	MB (megabytes)
Dimensions in Figures	No units specified (Inches understood	0.57 EJECT DISTANCE
	unless otherwise specified)

1.6For More Information

The web site http://www.dlttape.com includes more valuable information about SDLT systems; or to locate very specific product-related information, visit http://www.quantum.com/SDLT.

To contact Tandberg Technical Support, call +49-231-5436-142.

81-81184-02 REV A01 March 2004 1-3