Tandberg Data 600 manual Him, Hre, Hwe, Icm, Iec, Ieee

ISDLT 600 Product Manual

HIM	Host Interface Module. This board is one of two boards that
	make up the EIM. The HIM implements the interface between
	the host system and the tape drive; it comes in two different
	variations, SCSI and Fibre Channel.
HRE	Hard Read Error.
HWE	Hard Write Error.
Hz	Hertz. A measure of frequency (cycles per second).

I

ICM	Integrated Controller Module. This board is one of two boards
	that make up the EIM. The ICM contains the main controller and
	servo micro-processor, the custom-designed SDLT ASICs, and
	the cache memory.
IEC	International Electrotechnical Commission, an international
	standards organization for electronics and electrotechnical
	matters.
IEEE	Institute of Electrical and Electronics Engineers.
Interface	A hardware or software protocol, contained in the electronics of
	the tape controller and tape drive, that manages the exchange of
	data between the tape drive and computer. The most common
	interfaces for small computer systems are AT (IDE) and SCSI.
iTalk	DLTSage iTalk (and Pocket DLTSage iTalk). This software
	allows you to access system diagnostic information from your
	tape drive using an infrared communication port located on the
	front panel of the tape drive.

J

Jumper	A tiny connector box that slips over two pins that protrude from a
	circuit board. When in place, the jumper connects the pins
	electrically. The jumper can be moved to change electrical
	connections.

G-6 March 2004 81-81184-02 REV A01