Tandberg Data 600 manual AC Power Cable

Configuring and Installing a Tabletop Tape Drive SDLT 600 Product Manual

AC Power Cable

An AC power cord is supplied with each tabletop unit. Carefully inspect the power cord and ensure that the cord is the appropriate cord for your country or region based on the criteria below.

WARNING! Do not attempt to modify or use a tabletop 100–115 V AC power cord for 220–240 V AC input power. Modifying the power cord in any way can cause personal injury and severe equipment damage.

The AC power cord used with the tabletop unit must meet the following criteria:

•The power cord should be a minimum of 18/3 AWG, 60 °C, type SJT or SVT.

•UL and CSA certified cordage rated for use at 250 VAC with a current rating that is at least 125% of the current rating of the product.

•You must terminate the AC plug in a grounding-type male plug designed for use in your country or region. It must also have marks showing certification by an agency acceptable in your country or region.

•The tabletop unit cord connector must be an IEC type CEE-22 female connector.

•The cord must be no longer than 4.5 meters (14.5 feet).

•The cord must be FCC compliant with emissions specifications.

Figure 4-12shows the AC power cord plug-end types for 115 VAC and 220/240 VAC usage.

Figure 4-12.AC Power Cord Connector Types

4-24 March 2004 81-81184-02 REV A01