CHAPTER 4
Installing Your Tape Drive
This chapter describes how to install the SDLT 600 tape drive. This includes configuration jumper settings, connector pin assignments, installation instructions, power and signal cabling descriptions, and operating instructions. This chapter also includes information on configuring and connecting the tabletop version of the tape drive into a system.
This chapter covers the following topics:
•“Warranty Note” provides a general reminder of certain precautions to follow so that you do not void your warranty.
•“Safety, Handling, and ESD Protection” describes appropriate safeguards to use when working with the SDLT 600 tape drive system.
•
•“Configuring and Installing an Internal Tape Drive with SCSI Interface” describes how to configure and install an internal tape drive with the SCSI interface into a system.
•“Configuring and Installing an Internal Tape Drive with Fibre Channel Interface” describes how to configure and install an internal tape drive with the Fibre Channel interface into a system.
•“Configuring and Installing a Tabletop Tape Drive” describes how to configure and install the tabletop version of the tape drive.
•“Confirming the Installation” describes how to confirm that the tape drive has been installed correctly.
4.1Warranty Note
Please refer to the warranty before installing your tape drive. Certain actions taken during installation could void the warranty if not properly conducted.
March 2004 |