Recording a broadcast, and at the same time playing an existing recording

In addition, you can play an existing recording from the hard drive simultaneously with a new recording being stored.

>While a recording is in progress, call up the PVR navi- gator as described in Point 7.2.3.1.

>Use the arrow keys up/down to mark the recor- ding you wish to play, and start the playback procedu- re by pressing OK.

8.2.1.2 Pause/Freeze frame

>To stop the playback of a recording (freeze frame) press the yellow function key resp. the Freeze frame key while the playback is in progress.

The message “Pause uII” will be displayed.

>Press the respective key again to continue playback from the same spot.

8.2.1.3 Fast forward and rewind

To allow you to go to a specific point in a recording, your PVR provides fast forward and fast rewind functions.

>While in Play mode, press the blue function key

Fast forward resp. the red function key Rewind. The message “Fast forward ￿￿” resp. “Rewind ￿￿” will be displayed. The recording will now be play- ed at 4-timesspeed in the desired direction.

>If you press the blue resp. red function key again,

the speed will be increased to 16-times. The messa- ge “Fast forward ￿￿￿” resp. “Rewind ￿￿￿” will be displayed.

>If you press the blue resp. red function keys yet again, the running speed will be increased to 64-

times.

The message “Fast forward ￿￿￿￿” resp. “Rewind ￿￿￿￿” will be displayed.

>By pressing the blue resp. red fünction key once more, you can scan forward or backward through the recording in steps of 10 minutes.

>Once you have reached the desired spot in the recor- ding, press the yellow function key to go to normal viewing/playback mode.

53

Page 53
Image 53
TechniSat DigiCorder S2 manual Pause/Freeze frame, Fast forward and rewind, Times