10.4.1 Turning to a satellite position
To turn the antenna to the position set in the satellite list, your digital receiver is equipped with the function turn to sat.
>To open the window listing the available actions, press the blue function key Actions.
>Now use ther arrow keys up/down to mark the line turn to sat.
>Confirm by pressing OK.
>Press the yellow function key turn to sat to turn the antenna to the satellite position selected.
10.5 Deleting a satellite position
To delete a satellite position from the satellite list, proceed as follows:
>Use the arrow keys to mark the field Current satellite list.
>To open the current satellite list, press the OK key.
>Use the arrow keys up/down to select the satellite you wish to delete.
>Confirm by pressing OK.
>Use the arrow keys to mark the field Delete satellite.
>To delete the satellite selected, press the OK key.
>Mark the field OK and confirm by pressing OK.
10.6 Reference position
When installing the external installation, the motor must be set to the reference position (0°). You can therefore use the function “Go to reference position” to turn the motor to this position (0°) at any time.
>Press the green function key Ref.pos. to turn the antenna automatically to the reference position.
98
