> When you have finished configuring the programme
list according to your preferences in this manner,
press the Menu key to return to normal operation.
> To reverse the blocking of individual channels, pro-
ceed as described above to mark the appropriate
channel, and remove the parental control symbol by
pressing the yellowfunction key.

9.3.4 Selecting radio stations/programmes

You can use the same method as described in Point 9.3.3 to
block access to radio stations.
9.4 Programme search/scan
As mentioned before, your digital receiver is pre-programmed
for reception of the ASTRAand EUTELSAT satellites. To
receive new programmes, resp. the programmes of other
satellites, there are several options provided to perform a
programme search, or scan.
1. Automatic Scan
Select this type of search to scan all the satellites set in the
menu Antenna settings (Point 6.4and 10.4) for programmes.
2. Satellite Scan
Select this type of search to scan only a specific selected
satellite for programmes.
3. Transponder Scan
Select this type of search to scan a specific transponder of a
single satellite for programmes.
4. Manual Scan
Select this type of search to search specifically for one parti-
cular programme, using the programme-specific PID num-
bers.
When the scanning procedure has been completed, a mes-
sage will appear on your screen, indicating how many pro-
grammes were found by the digital receiver, how many of
these are new programmes, and how many are encrypted
programmes. New programmes are saved in the Total list,
and can then be transferred to the Favorites listin accor-
dance with Point 9.1.
> To commence searching for programmes, first call up
the Main menu. (Fig. 9-14)
> Use the arrow keys up/down to mark the line
Scan channels.
> Confirm by pressing OK.
The sub-menu Scan channels will be displayed. (Fig.
9-15)
81
(Fig. 9-14)
(Fig. 9-15)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 81