TechniSat DigiCorder S2 manual Manual search, Lines PCR PID, Audio PID and Video PID

> By pressing the OK key, decide whether you wish to scan only for free-to-air programmes (Free pro- grammes), or whether you wish to include encrypted programmes in the search (All programmes).

> Use the arrow keys up/down to mark the field Start search.

The scan will be started. Please note any additional messages displayed on screen.

> You can abort the scan by pressing the red function key.

9.4.4 Manual search

	Should a programme not be found in the course of an auto-
	matic search, a satellite search or a transponder search, it
	may be necessary to enter additional programme-specific PID
	numbers for this programme. You will need to obtain these
	numbers on the Internet, or possibly direct from the program-
	me provider concerned.
	The menu (Fig. 9-19)differs from the menu Transponder
	search only with regard to the menu items PCR PID,
	Audio PID and Video PID. There is no need to enter the
	search mode.
(Fig. 9-19)
	>	Proceed as described under Transponder search.
	>	Then use the arrow keys up/down to mark the
		lines PCR PID, Audio PID and Video PID and
		use the numeric keys to enter the corresponding
		numbers.
	>	Use the arrow keys up/down to mark the field
		Start search, and confirm by pressing OK.
		The scan will be started. Please note any messages
		displayed on screen. If no programme is found as a
		result of the PID search, a query message will be
		displayed, asking whether this programme should be
		generated.
	>	If you wish to generate this programme, use the
		arrow keys left/right to select the field Yes, and
		confirm by pressing OK.
		The programme will now be generated, and will be
		added at the end of the Favourites list.
	>	You can press the red function key to abort the
		search.

84