Marking a block
To mark several files simultaneously, proceed as fol-
lows:
> Press the OK key to go to the selection mode.
The marked file will be marked with a cross on the
left-hand side.
> You can now use the arrow keys up/downto also
mark the preceding or the following files.
> Once you have completed marking the desired files in
this manner, press the yellowfunction key Copy to
copy the marked files on to the hard drive.
Please note that it is not possible to mark blocks of folders,
only files!
8.3.2.2 Moving
The Moving function allows you to move or shift the marked
file resp. the marked folder from the source medium (e.g. the
USB device) to the target medium (e.g. the hard drive). At the
end of this procedure, the file or folder that has been moved
will be present only on the target medium, and will be deleted
from the source medium.
> Use the redfunction key Set-Top-Box or the
green function key USB devices to go to the sour-
ce on which the file or folder to be moved is currently
stored.
> Use the arrow keys up/down to mark the file or
the folder you wish to move.
> Press the blue function key Functions to open a
window showing the available functions.
> Use the arrow keys up/down to mark the line
Moveand confirm by pressing OK.
> To move the marked file resp. the marked folder, now
press the yellowfunction key Move.
> To move several files simultaneously, mark these as
described in Marking blocks above.
67
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 67