9.5.3 Updating the programme list (ISIPRO)

The ISIPRO programme list updating function ensures that the programme list of your receiver will automatically be kept up to date. To do this, a current programme list is broadcast at regular intervals via satellite (ASTRA 19,2° East) and is available to your receiver for downloading.

Should the parameters for the data channel used to downlo- ad the programme list have changed, you can correct them either in this menu or under Point 9.4.4 (manual programme scan. The current transponder data can be obtained from your authorised retailer. Generally, you should not make any changes in this menu under normal circumstances.

>Press OK to go to the sub-menu Update program- me list (Fig. 9-25).

>In order for your receiver to check automatically whet- her a new progtramme list is available, mark the line

Update.

>Switch the automatic programme list updating function to on by pressing the OK key.

>To check manually for the availability of a new pro- gramme list, press the green function key Test. If a new programme list is available, a message will be displayed (Fig. 9-26).

>To download the programme list, mark the field Yes and confirm by pressing OK.

Your receiver will then re-start, and will indicate the availability of a new programme list by displaying a message (Fig. 9-27)on screen.

>If you do not wish to download the new programme list, press the red function key Reject. The message will only be displayed again when an even more up-to- date programme list is transmitted.

Update programme list automatically

If you would like to have the updating of changes in the pro- gramme list performed automatically, without any need for a manual procedure, then you should select this option. The changes will be implemented automatically. Newly found pro- grammes will generally be added to the end of the Main Favourites list.

>To update the new programme list automatically, press the green function key Automatic. The download of the programme list will be started, and the progress of the procedure can be followed on screen

(Fig. 9-28).

(Fig. 9-25)

(Fig. 9-26)

(Fig. 9-27)

(Fig. 9-28)

87

Page 87
Image 87
TechniSat DigiCorder S2 manual Updating the programme list Isipro, Update programme list automatically