TechniSat DigiCorder S2 manual Programme/channel search/ISIPRO

>Press the green function key Update. (Fig. 5-5).The new software for your receiver will now be down- loaded.

This procedure may take a few minutes.

>If you do not wish to download the new software at this time, press the yellow function key Skip.

>If now new software is available at the present time, press the green function key Continue.

You will then proceed to the programme search func- tion.

Programme/channel search/ISIPRO

You have verious options of searching for new channels, resp. of updating the programme list.

You can either use the ISIPRO programme list function to download a new programme list for your receiver from the satellite, or you can perform a programme scan/search.

>To download a current programme list, use the arrow keys up/down to mark the line ISIPRO program- me list update.

(Fig. 5-6)

>Confirm by pressing the green function key Start. The current programme list will now be downloaded from the satellite. Please note any messages display- ed on screen, as well as the explanations under Point 9.5.3.

If you wish to perform a programme scan, proceed as fol- lows:

>Use the arrow keys up/down to mark the field All programmes if you wish to search for both free-to- air and encrypted programmes, or All unencrypted if you wish to search only for free-to-air programmes.

>Start the scanning procedure by pressing the green function key, and an automatic programme scan will be performed. All the satellites included in your anten- na configuration will be scanned for programmes. This procedure may take a few minutes. Please note any messages displayed on screen.

(Fig. 5-5)

(Fig. 5-6)

17