Tektronix Phaser 840 setup guide Finding the printer’s name in the Chooser

3 EtherTalk, LocalTalk, and TokenTalk Configuration

Finding the printer’s name in the Chooser

1.From the Apple menu, select Chooser.

2.In the upper-left corner of the Chooser, find the driver icon. (If the driver icon is not in the Chooser, you need to install the printer driver.) Click the driver icon.

3.If a list of zones appears in the lower-left portion of the Chooser, select the proper zone.

N O T E

The printer’s default zone is listed on the Configuration Page in the EtherTalk or TokenTalk field. For more information on the Configuration Page, see “Printing a Configuration Page” on page 2.

4.A list of printers appears in the right portion of the Chooser; find your printer’s name. The printer’s default name is listed on the Configuration Page (see “Printing a Configuration Page” on page 2). If the name does not appear, check the cable connection between your printer and the network.

N O T E

It is possible for the Printer Name field on the Configuration Page to be blank. When the printer is powered up, it uses a default name and then checks to see that no other printer on the network has the same name. If enough printers with the same default name are present, it can take several minutes for the printer to establish a unique name. If the Printer Name field on the Configuration Page is blank, wait a short time and reprint the Configuration Page.

20PhaserShare Networking