Tektronix Phaser 840 setup guide Windows NT, Setting the printer’s IP address

Chapter

7 Windows NT

The procedures in this chapter are valid for Windows NT version 3.x and 4.x. For information about driver installation for later versions of Windows NT, visit the Tektronix web site:

www.tek.com/Color_Printers/support

Setting the printer’s IP address

Set the printer’s IP address by any of the methods described in Chapter 8, “Setting the Printer’s IP Addressing Parameters”.

Adding a Windows NT 4.0 driver on a Windows NT 4.0 server or workstation

The Windows NT 4.0 PostScript driver is a PPD-based driver. Follow these instructions to add or update the Tektronix Phaser PPD (PostScript Printer Description) file for use with Windows NT 4.0. Adding this support gives your printer access to Tektronix page sizes, tray selection, TekColor color corrections, and resident fonts.

This update procedure provides printer page-size information for Windows NT applications. These instructions assume a basic familiarity with Windows NT operation and terminology. For additional information about Windows NT, refer to your Microsoft Windows NT documentation.

N O T E

You may need the Windows NT 4.0 CD-ROM or your printer’s software

CD-ROM to complete this procedure.

Setup Guide 37