Toshiba Strata DK manual Features, Calling a Station, Transferring a Call, 103

DSS Console

Features

Features

The LED color indications described here apply to DSS Console models HDSS2060 and HDSS1060. Flash conditions described here apply to all DSS Console models.

Calling a Station

To call a station [PDN] from a DSS Console, press the [DSS] associated with the station. A station call with a [DSS] button can be made on-hook or off-hook and with Voice First or Tone signaling. After pressing the button, treat the call like any other station call made from a electronic telephone.

[DSS] LEDs show if the associated station is idle or busy. The LED is steady red if the station is busy or ringing, and is not lit if idle. If all the station’s PDN buttons are being used by other stations, the [DSS] LED of the station lights steady red, but the station may be idle. If the station is in the DND mode, its [DSS] LED lights steady red.

Transferring a Call

You can transfer internal or outside calls to an idle station from a DSS Console. You can transfer a call to a busy station from your DSS Console. Use [DSS] to transfer the call, even though the [DSS] LED for the station you are transferring to is red.

➤To transfer a call to an idle station

1.Press the [DSS] button associated with the called station.

2.Announce the call.

3.Hang up.

The call is automatically placed on hold. The CO or [DN] LED flashes at double the on-hold rate, and the [DSS] LED flashes.

You hear a single-ring tone. If using the tone signaling mode, you hear successive ring tones.

With tone signaling, you have to wait for the called station to answer before announcing the call.

The call rings the called station when you hang up. While the called station is ringing, the [DSS] LED is steady red, and the CO LED flashes at the on-hold rate or if on a [DN] button, it goes idle.

Strata DK Electronic Telephone 5/00 103