Features
Call Forwarding
When forwarding to an outside destination include the CO line (or CO line group) access code before the telephone number,
See Table 11 on Page 108 for CO Line/Line Group access codes. The LCR access code “9” cannot be used.
2.Press &)(;7
...or the [PDN]/ [PhDN] + .
Incoming calls forward to the destination stored at Station Speed Dial Location 49.
➤To cancel a Call Forward–External
➤Press &)²(;7
...or [PDN] + + 63.5.
Call Forward Remote Destination Change
If Call
1.Call into the DK system over a CO Line programmed for the DISA feature.
2.Press then dial your [PDN] after you receive dial tone.
3.Enter the Remote Call Forward- External security code.
You hear ringback tone signal, then internal dial tone for 10 seconds.
Try again if you hear busy tone.
Note See the System Administrator for DISA telephone numbers.
You hear a confirmation tone.
If a number is not dialed, the system automatically makes the DISA CO Line ring as a normal incoming call. Then, if the call is not answered within 15 seconds after the ringing starts, it disconnects.
You hear a confirmation tone. See the System Administrator for the security code which is assigned to your telephone in system programming.
Strata DK Electronic Telephone 5/00 | 31 |
