Features
Automatic Callback (ACB)
Automatic Callback (ACB)
After reaching a busy/DND station, you can set ACB to have the system call you when the called station becomes available. You can also set ACB to place you in a queue for an available CO Line, if you reach a line group in which all lines are busy.
1. Press $&% |
...or . |
You hear a busy tone, followed by dial tone for two seconds, then busy tone.
When you set ACB at a busy line group, its access code number (801) displays.
NO. 204 INT 210 ACB SET
NO. 204 INT 801 ACB SET
2. Hang up |
...or press 63.5. |
You can make other calls while waiting for the called station/line to become available.
Your telephone rings at a fast rate when the called station or CO Line is idle.
The busy or DND station LED flashes (incoming call) and its number (210) displays when it is available.
NO. 204
210 ACB
NO. 204
LINE 3 ACB
3.Press [DN] to answer the call within three rings.
The CO Line LED from which you attempted to first access the line flashes red (incoming call rate). The seized line number (3) is displayed.
After you answer, you hear a single tone, and the LED flashes.
If you hear a busy tone after answering a callback, the called party is already on another call or the line has been seized. Your request is not cancelled. You are called again the next time the line is idle.
If the original call was made using LCR, the telephone number is automatically dialed. If you did not use LCR, you have to redial the telephone number.
Strata DK Electronic Telephone 5/00 | 23 |
