Toshiba Strata DK manual CO Line Access Codes, To access a line

Access Codes A

This appendix contains access codes for outside Speed Dial (SD) numbers, CO lines, Paging Group and Paging Zone Codes.

CO Line Access Codes

CO lines are used when you dial an outside number. If your telephone does not have a &2 button, you can enter the appropriate code listed in Table 11 on Page 108 to access an outside line.

You can also store the code on a 6' button for one-touch access. If you are storing a

CO Line access code onto a Speed Dial code, enter ￿￿ before the CO access code (e.g., to store code ￿￿￿￿￿, enter ￿￿￿￿￿￿).

In some systems, ￿ is used as a general group code or to access Least Cost Routing (LCR). System users are required to dial ￿ in order to access an outside line. If you press ￿ in a system programmed with LCR, you may not hear internal dial tone, depending on system programming.

See your System Administrator for the code which applies to your telephone.

➤To access a line

➤Press [PDN] + CO Line Access Code.

Strata DK Electronic Telephone 5/00 107